Soosan hydraulic breaker SB81 Fine Quality
The power source of the hydraulic breaker is the pressure oil provided by the excavator or the pumping station of the loader. It can more effectively clean the mud in the floating stones and rock gaps in the function of excavating the foundation of the building. The principle of selecting a hydraulic breaker is to select the most suitable hydraulic breaker according to the type of excavator and the environment of the operation.
Model and selection editing
1) The number in the hydraulic hammer model may indicate the weight or bucket capacity of the excavator. It may also indicate the weight of the hammer, or the diameter of the drill rod, or the impact energy of the hammer. In most cases, the number does not correspond to the meaning it represents, and is often a range of quantities. And sometimes the parameters of the hydraulic hammer have changed, but the model remains the same, which makes the meaning of the model number more blurred. What's more, the data is inconsistent with the actual data, and users should pay more attention.
2) The matching of the hydraulic hammer and the excavator. For the excavator user, the main consideration is the weight matching, and the power matching is also checked. For other load-bearing machines, power matching is as important as weight matching. It is also very reliable to choose a hydraulic hammer based on the experience of other users.
Soosan hydraulic breaker suitable for excavators:
Our Soosan hydraulic crusher is suitable for all kinds of excavators: Doosan Daewoo, Volvo, Hitachi, Kato, Kobelco, Komatsu, Sumitomo, Liebherr, Hyundai, Cat, Jonyang, Yangtze River, Lichd, Sany, etc. Move the loader.
Inspection and maintenance of the Soosan broken hammer
As the working conditions of the Soosan broken hammer are very bad, the correct maintenance can reduce the failure of the machine and prolong the service life of the machine. In addition to the maintenance of the machine in time, we should pay attention to the following points:
Soosan hydraulic breaker inspection of the appearance
1) Check whether the bolts are loose;
2) Whether the pins of each connection are excessively worn;
3) check whether the gap between the brazing rod and the bushing is normal, whether there is oil exudation between them, indicating that the low pressure oil seal has been damaged, and the professional personnel should be replaced and lubricated.
4) The lubrication point of the working device should be lubricated before operation and 2-3 hours after each continuous operation.
5) change the hydraulic oil: the change of hydraulic oil quality is different because of the different working environment. The simple way to judge the quality of the oil is to observe the color of the oil. When the deterioration of the oil is very serious, the oil should be released, and the new oil is injected after the oil tank and the filter.
6) the main body of the broken hammer is a set of inclusion. Precision components of hydraulic circulation system, generally without special equipment factories do not decompose themselves, must be commissioned maintenance.
Soosan hydraulic breaker Maintenance
1) rust prevention: when more than 3 months (wet season is 1 months) no use should be put to the cylinder body nitrogen, the impact piston to push the cylinder block, to prevent corrosion and damage to the piston seal.
2) replacement seal:
The actual worker needs to replace the hydraulic seals every 1000 hours. When the drill rod leaks oil, the seals at the bottom of the piston should be replaced in time.
3) hydraulic oil and filter core:
Replacement of hydraulic fluid for the first time: 250 hours; after every 600 hours. Replacement of oil filter element: the first 50 hours: after every 100 hours
Perfil de la compañía
China Sanyu Machinery Equipment Co., Ltd. es un fabricante profesional de martillos hidráulicos. Desde 2003, ha pasado la certificación CE. Introducir tecnología avanzada y equipo extranjero para producir interruptores automáticos. Utiliza métodos modernos de procesamiento y administración basados en producción, ventas e investigación. Y desarrollo. Los interruptores de circuito en miniatura de la compañía son conocidos por su excelente rendimiento y poderoso impacto. Los productos se producen con alta calidad, alta estabilidad, mecanizado de precisión y durabilidad. Son ampliamente utilizados en trituración, minería, carreteras e ingeniería civil. Ingeniería, demolición, ingeniería especial (ingeniería subacuática, ingeniería de túneles, etc.) y otras áreas de construcción.
1.Supply item design,process design.
2.Help you to choose the fit machine.
3.Making the machine according to your requirement.
1.Acceptance equipment together with you.
2.Help you to make the method statement the details of the process.
1.Warranty for a year.
2.Quality problem,we will send you the accessories.
3.Free repair whole using life(without the freight and accessories charge).
1.ARE YOU A MANUFACTURE?
Yes!We are the manufacture and established in 2003.Our factory mainly produces work attachments and steel structure parts.Addtionally,we also agent other products from our cooperated factory with good quality and best price.
2.WHY CHOOSE SANYU OVER ANY OTHER COMPANIES?
We manufacture our products locally.Our customer service is exceptional,and personalized for every customers needs.Every SANYU product is armored and durable complete with a 12 months structural warranty.We use high quality materials sourced from the very high best in China.Our design team works closely with customers for any custom order
3. CAN YOUR COMPANY SUPPLY SAMPLE?
Yes, sample can be supplied.
4. WHAT IS YOUR MOQ?
Our MOQ is 1 set
5. WHICH PAYMENT TREM YOUR COMPANY ACCEPT?
We accept T/T, LC, Moneygram, Western Union, Paypal, etc.
6.WHEN YOU WILL SEND PARCEL?
We will send parcel as soon as possible after payment confirmed.
7. WHEN I WILL RECEIVE PARCEL?
We prefer express delivery, usually takes 3-7 days to delivery by DHL/FedEx/UPS.
Container cargo will send by sea freight FOB/CIF, delivery time depends on destination port.
Company Name: Yantai Sanyu Machinery Equipment Co., Ltd.
Address: No. 219, Xingfu, District, Shiba, Yantai City
Mobile / Whatsapp / WeChat /: +86 15589628557